Linn Bathroom Furniture Oil - Livos

Linn - Bathroom furniture oil - Livos

This oil is recommended for solid wood furniture subimtted to high humidity levels, especially bathroom furnitures.

Features :

• Water resistant, high gloss
• Superior resistance to toothpaste stains
• Can be used as a topcoat over countertop oil or on universal hard oil.

Preparation :

1. Wood must be dry (wood moisture content below 12%), solid, absorbent, free of resin and dust.
2. With large-pored wood (walnut, oak, ash, chestnut, elm, mahogany or teak) brush out the pore grooves thoroughly.
3. Gradual presanding according to the sandpaper gradation up to 240 grain, except oak use 180 grain.

Application :

1. Shake welle before use.
2. Appliquer au pinceau 3 couches jusqu’à formation d’un film protecteur de surface à une température ambiante supérieure à 16°C.
3. Apply first coat and wait 5-10 minutes, then remove excess oil with a lint-free cloth.
4. Apply second coat as the first coat.
5. Sand-in between coats with a 320 grit sandpaper.
6. The thrid coat should, drop-by-drop, be polished immediately.

If surface is already oiled with countertop oil or on universal hard oil, sand with 180 grit sandpaper, then apply a single coat of  Clear bathroom furniture oil.

Drying time :

• 5 to 8 hours at 23°C and 50% relative humidity.
• Final degree of hardness is reached after 4 weeks.

Coverage :

750 ml covers approximately 12 m² when applying 3 coats. Determine the exact amount needed by doing a test application.

Usually :

1^st coat : 56 ml/m², 1 L is sufficient for aprroximately 18 m² (194 sq. ft.)

2^nd coat : 16 ml/m², 1 L is sufficient for aprroximately 63 m² (678 sq. ft.)

3^rd coat : 11 ml/m², 1 L is sufficient for aprroximately 90 m² (978 sq. ft.)